GE HEALTHCARE Typhoon FLA 7000 User Manual page 94

13 Troubleshooting
Errors and warnings in the
Method Settings window
Error message
Please input a method name.
The maximum number of the
methods is 50.
This method name has been
already used. Please change
the name.
Errors and warnings in the
Reader Settings window
Error message
Failed to retrieve image data
from the scanner. Check the
scanner connection.
Cannot detect Typhoon FLA
7000. Please check connec-
tion and power.
Typhoon FLA 7000 imager is
running self-diagnosis mode.
Please wait.
94
Meaning and countermeasure
No name has been assigned to the method.
Countermeasure: Type a method name in the
Name field.
The maximum number of methods are stored. No
more methods can be registered.
Countermeasure: Use an existing method, or delete
a method before registering a new one.
The assigned name is being used by a different
method.
Countermeasure: Type a different name in the
Name field.
Meaning and countermeasure
There was a problem transferring data to the com-
puter.
Countermeasure: Check the scanner connection
to the computer.
The scanner was not detected by the computer.
Countermeasure: Check that Typhoon FLA 7000 is
properly connected. Follow the instructions in
Chapter 4 Installing and moving Typhoon FLA 7000,
on page 34.
The self-diagnosis of Typhoon FLA 7000 is running.
Countermeasure: Wait until the self-diagnosis is
finished, the proceed with the scan.
Typhoon FLA 7000 User Manual 28-9607-62 AC