GE HEALTHCARE Typhoon FLA 7000 User Manual page 32

3 System configuration
3.3 Accessories
Phosphor stage (included)
The phosphor stage is used when reading storage phosphor screens. The stage is
magnetic to hold storage phosphor screens.
•
•
•
•
•
Power cord (included)
Typhoon FLA 7000 uses a special AC power cable. Be sure to use power cables specified
in service manuals or by service personnel.
Suction rod (included)
The suction rod is used to lift up or place the the storage phosphor screen on the phosphor
stage.
Press the suction rod against the storage phosphor screen. Place a finger on the end of
the suction rod, then lift up the storage phosphor screen. Release the finger to release
the storage phosphor screen.
32
Place the phosphor stage upside down on a flat surface.
Place the storage phosphor screen on the phosphor stage, with the reading surface
facing away from the phosphor stage.
Place the protective cover on top of the storage phosphor screen.
Flip the phosphor stage over.
Place the phosphor stage in Typhoon FLA 7000.
Storage phosphor screen
sticking side
Typhoon FLA 7000 User Manual 28-9607-62 AC