Installing The Power Supply Unit Blank - Dell poweredge T430 Owner's Manual

CAUTION: To ensure proper system cooling, the PSU blank must be installed in the second
PSU bay in a non-redundant configuration. Remove the PSU blank only if you are installing a
second PSU.
Figure 85. Removing the PSU blank
1. PSU blank
Next steps
Install the PSU or PSU blank.
Related links
Safety instructions

Installing the power supply unit blank

Installing a redundant power supply unit
Safety instructions
Before working inside your system
Removing a redundant AC power supply unit
Removing the power supply unit blank
Installing a redundant power supply unit
Installing the power supply unit blank
After working inside your system
Installing the power supply unit blank
Install the power supply unit (PSU) blank only in the second PSU bay.
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
178
2. PSU bay