Removing The Control Panel Board - Dell poweredge T430 Owner's Manual

Figure 100. Installing the control panel assembly cover for system with LED panel
1. tab (3)
3. slot (3)
Next steps
1. Install the control panel assembly.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the control panel assembly
Preparing a system for conversion from tower mode to rack mode
Removing the control panel assembly cover
After working inside your system

Removing the control panel board

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the Phillips #2 screwdriver ready.
3. Follow the procedure listed in the Before working inside your system section.
4. Remove the control panel assembly.
5. Remove the control panel assembly cover.
2. control panel assembly cover
195