Dell poweredge T430 Owner's Manual page 110

2. Keep the #2 Phillips screwdriver ready.
3. Follow the procedure listed in the Before working inside your system section.
4. Disconnect the data and power cable(s) from the hard drive(s).
Steps
1. Loosen the two captive screws securing the internal hard drive bay to the chassis.
2. Lift the internal hard drive bay up and out of the chassis.
Figure 39. Removing the internal hard drive bay
1. cabled hard drives (4)
3. internal hard drive bay
Next steps
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the internal hard drive bay
Removing a cabled hard drive
After working inside your system
110
2. captive screws (2)