Installing A Cabled Power Supply Unit - Dell poweredge T430 Owner's Manual

Hide thumbs Also See for poweredge T430:
Table of Contents

Advertisement

Installing a cabled power supply unit

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Unpack the new power supply unit (PSU).
Steps
1.
Slide the new PSU into the PSU cage until the PSU is fully seated.
2.
Tighten the screw to secure the PSU to the chassis.
3.
Connect all the power cables from the PSU to the system board, hard drive backplane, hard drives,
and optical drives.
183

Advertisement

Table of Contents
loading

Table of Contents