Nic Indicator Codes; Redundant Power Supply Unit Indicator Codes - Dell poweredge T430 Owner's Manual

NIC indicator codes

Each NIC on the back panel has an indicator that provides information about the network activity and link
status. The activity LED indicates whether the NIC is currently connected or not. The link LED indicates
the speed of the connected network.
Figure 9. NIC indicators
1. link indicator
Table 10. NIC indicators
Convention Status
A Link and activity indicators are off
B Link indicator is green
C Link indicator is amber
D Activity indicator is flashing green

Redundant power supply unit indicator codes

Each AC power supply unit (PSU) has an illuminated translucent handle that indicates whether power is
present or whether a power fault has occurred.
28
2. activity indicator
Condition
The NIC is not connected to the
network.
The NIC is connected to a valid network
at its maximum port speed (1 Gbps or 10
Gbps).
The NIC is connected to a valid network
at less than its maximum port speed.
Network data is being sent or received.