Installing The Control Panel Board - Dell poweredge T430 Owner's Manual

Next steps
1. Install the control panel board.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system

Installing the control panel board

After working inside your system
Installing the control panel board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver ready.
Steps
1. Align the control panel board with the control panel.
CAUTION: Take care not to damage the mylar covering the ID switch.
2. Slide the control panel board toward the front of the control panel to lock the slide tabs and the
screw holes into the respective slots on the control panel.
3. Tighten the screws to secure the control panel board to the control panel.
197