Dell poweredge T430 Owner's Manual page 201

Steps
1. Align the LCD module with the LCD module slot and insert the LCD module into the control panel.
2. Tighten the screw to secure the LCD module to the control panel.
3. Insert the LCD module cable into it's connector on the control panel board and push the retention
tab in to secure the cable.
Figure 106. Installing the LCD Module
1. LCD module
3. LCD cable connector
5. screw
Next steps
1. Install the control panel assembly cover.
2. Connect the LCD cable, the control panel cable, and the control panel USB cable to the control
panel board.
3. Install the control panel assembly.
4. Connect the control panel cable, the LCD cable, and the control panel USB cable to the system
board.
5. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the control panel assembly cover
Installing the control panel assembly
Removing the LCD module
After working inside your system
2. retention tab
4. LCD cable
201