Dell poweredge T430 Owner's Manual page 171

CAUTION: Do not use force to seat the processor. When the processor is positioned
correctly, it engages easily into the socket.
8. Align the pin-1 indicator of the processor with the triangle on the system board.
9. Place the processor on the socket such that the slots on the processor align with the socket keys.
10. Close the processor shield.
11. Lower the close first socket-release lever near the lock icon
12. Similarly, lower the open first socket-release lever near the unlock icon
to lock it.
Figure 80. Installing a processor
1. socket-release lever 1
3. processor
5. processor shield
7. processor socket
Next steps
NOTE: Ensure that you install the heat sink after you install the processor. The heat sink is necessary
to maintain proper thermal conditions.
1. Install the heat sink.
2. If removed, reinstall the PCIe expansion card riser.
and push it under the tab to lock it.
and push it under the tab
2. pin–1 corner of the processor
4. slot (4)
6. socket-release lever 2
8. tab (4)
171