Removing A Cabled Hard Drive - Dell poweredge T430 Owner's Manual

Related links
Safety instructions
Before working inside your system
Removing the internal hard drive bay
Installing a cabled hard drive
After working inside your system

Removing a cabled hard drive

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Keep the #2 Phillips screwdriver ready.
3. Follow the procedure listed in the Before working inside your system section.
4. Remove the internal hard-drive bay.
Steps
1. Remove the four screws securing the hard drive to the internal hard-drive bay.
2. Remove the hard drive from the internal hard-drive bay.
112