Removing The Control Panel Assembly Cover - Dell poweredge T430 Owner's Manual

Figure 96. installing the control panel assembly
1. control panel
3. control panel USB cable
Next steps
1. Install the optical drive and tape drives.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Preparing a system for conversion from tower mode to rack mode
Removing the control panel assembly
After working inside your system

Removing the control panel assembly cover

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the control panel assembly.
Steps
1. Unhook the tab adjacent to the power button.
2. Unhook the tab on the bottom of the control panel assembly cover.
192
2. control panel cable
4. screw