Installing The Power Interposer Board - Dell poweredge T430 Owner's Manual

Figure 90. Removing and installing the power interposer board
1. GPU power connector
3. release latch
5. slots (4)
Next steps
1. Install the PIB.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing a redundant AC power supply unit
Removing the cooling shroud

Installing the power interposer board

After working inside your system
Installing the power interposer board
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Follow the safety guidelines listed in the Safety instructions section..
186
2. power interposer board
4. hooks (4)