Installing The Lcd Module - Dell poweredge T430 Owner's Manual

Figure 105. Removing the LCD Module
1. LCD module
3. LCD cable connector
5. screw
Next steps
1. Install the LCD module.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Removing the control panel assembly
Removing the control panel assembly cover

Installing the LCD module

After working inside your system
Installing the LCD module
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the Phillips #2 screwdriver ready.
200
2. retention tab
4. LCD cable