GRAPHTEC gl200 Service Manual page 19

(3) Press the [ENTER] key to display the "Information" menu shown below.
(4) Press the [LEFT DOUBLE ARROW Direction] key 10 times in order to display the "Setup" menu shown
below.
(5) Move the cursor to the "Mode" position using the [Direction] keys.
(6) Press the [ENTER] key to display the menu from which you can execute the various Setup operations.
Setup mode
Setup1 (Basic)
Setup2 (Room temp.)
(7) Select the Setup mode using the [Direction] keys, and then press the [ENTER] key.
GL200-UM-251-9370 4-2
4. SETUP PROCEDURES