V500-R521B2/C2; Setting For Number Of Reading Digit - Omron V500-R521B2 User Manual

Setting for number of reading digit

When the number of digit is fixed, designate the number of digit to improve reliability.
For number of digit, two types (A and B) can be set.
In case of the bar code including C/D, count the C/D as one digit.
Menu sheet
Number of digit is not designated.
(Factory default setting)
Designation of number of digit A (Bar
code reading system) *1
Designation of number of digit B (Bar
code reading system) *1
*1 After reading this menu sheet, read the bar code of the number of digit you want to register twice,
continuously. When the number of digit is one type, set A and B to the same setting.
*2 After transmitting this command, transmit the character string of the bar code you want to register,
continuously.
p.54
Command
None Designation of number of digit A *2
(No menu sheet)
None Designation of number of digit B *2
(No menu sheet)
None
Section 4
Setting Method
Menu sheet

V500-R521B2/C2

User's Manual
Command
7V
7W
69