Extreme Networks SSA-G8018-0652 Hardware Installation Manual page 66

Figure 34: Securing the SSA switch to the Rack
1 = Flush mount configuration
2 = Mid-mount configuration
2 For a flush mount rail assembly configuration, secure each side of the chassis using a user-supplied
screw or fastener appropriate to your rack.
3 For a mid-mount rail assembly configuration, secure each side of the chassis using a black, 10-32
screw that comes with the rack mount kit.
These screws are screwed into the cage nut installed in the square rail ear opening as described in
step 3 on page 63.
S-Series Stand Alone (SSA) Switch Hardware Installation Guide
Optional Rack Mount Rail Kit Installation
3 = Rack-appropriate screws or fasteners (2)
4 = Black 10-32 screws (2)
66