Extreme Networks SSA-G8018-0652 Hardware Installation Manual page 49

Warning
This unit may have more than one power supply cord. Disconnect two power supply cords
before servicing to avoid electric shock.
Advertencia: Esta unida puede tener mas de un cable de fuente de poder. Desconectar dos
cables de fuentes de poder antes de dar servicio para prevenir riesgo eléctrico.
Warnhinweis: Dieses Gerät hat mehrere Netzanschlüße, trennen Sie vor den Wartungsarbeiten
beide Netzanschlüsse vom Versorgungsnetz. zum Schutz vor elektrischen Schlägen.
Avertissements: Cet élément pourrait avoir plus d'un câble d'alimentation. Déconnectez tous
les câbles d'alimentation avant d'effectuer les opérations de maintenance sur l'appareil afin de
réduire les risques d'électrocution.
Caution
An antistatic wrist strap is required to perform the procedures in this appendix. Use the
antistatic wrist strap to minimize ESD damage to the devices involved.
Precaución: Para llevar a cabo los procedimientos especificados en el apéndice deberá utilizar
una pulsera antiestática. Esta pulsera sirve para minimizar los efectos de las descargas de
electricidad estática.
Figure 21 shows the location of the mode switches and the switch settings for normal operation. These
switches are set at the factory and rarely need to be changed. Switches are numbered 1 through 8 from
left to right.
Figure 21: Mode Switch Locations
1 = Fan Module bay 2
Switch definitions and positions are as follows:
S-Series Stand Alone (SSA) Switch Hardware Installation Guide
Clearing Persistent Storage or Resetting the System Password
2 = Mode switches
49