Extreme Networks SSA-G8018-0652 Hardware Installation Manual page 19

4 Repeat step 1 through step
Figure 7: Mid-Mount I/O Ports Facing Front Configuration
1 = Ear mount screw removal
2 = Repositioning of rack mount ear
Mid-Mount Configuration with Power Supply Facing Front
The mid-mount, power supply facing front, configuration is depicted in callout 4,
This rack mount configuration requires repositioning the rack mount ears on both sides of the device.
To reposition the rack mount ears for this configuration, follow these steps:
1 Unscrew the two rack mount ear screws as shown by callout 1,
2 Reposition the rack mount ear towards the power supply end of the device, shown by callout 2 and
the thick black arrow.
The three-holed ear is now located in the middle of the device, facing the power supply side.
3 Reinsert the two rack mount ear screws, shown by callout 3.
S-Series Stand Alone (SSA) Switch Hardware Installation Guide
3 on the other side of the chassis.
3 = Ear mount screw insertion
Figure 3
Figure 8 on page 20.
Installation
on page 13.
19