Transducer Inputs/Outputs - GE L90 Instruction Manual

6.3 METERING
PATH: ACTUAL VALUES
# DCMA INPUT xx
#
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed Channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
# RTD INPUT xx
#
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed Channel ID
and the bottom line as the value.
6
6-18
!" !"
METERING TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
!" !"
METERING TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
L90 Line Differential Relay
6 ACTUAL VALUES

6.3.7 TRANSDUCER INPUTS/OUTPUTS

!
DCMA INPUT xx
!
RTD INPUT xx
GE Multilin