Data Logger; Breaker Maintenance - GE L90 Instruction Manual

Line differential relay ur series
Hide thumbs Also See for L90:
Table of Contents

Advertisement

6.4 RECORDS
PATH: ACTUAL VALUES

# DATA LOGGER

#
The
OLDEST SAMPLE TIME
at which time it will start counting at the defined sampling rate. The
ples were taken. It counts up at the defined sampling rate. If Data Logger channels are defined, then both values are static.
Refer to the
COMMANDS
PATH: ACTUAL VALUES
# BREAKER 1
#
6
There is an identical menu for each of the breakers. The
!"
COMMANDS
CLEAR RECORDS
defined as the slowest operating time of breaker poles that were initiated to open.
6-22
!"
!"
RECORDS
DATA LOGGER
OLDEST SAMPLE TIME:
2000/01/14 13:45:51
NEWEST SAMPLE TIME:
MESSAGE
2000/01/14 15:21:19
is the time at which the oldest available samples were taken. It will be static until the log gets full,
!"
menu for clearing data logger records.
CLEAR RECORDS
!"
!"
RECORDS
MAINTENANCE
BKR 1 ARCING AMP φA:
0.00 kA2-cyc
BKR 1 ARCING AMP φB:
MESSAGE
0.00 kA2-cyc
BKR 1 ARCING AMP φC:
MESSAGE
0.00 kA2-cyc
BKR 1 OPERATING TIME
MESSAGE
φA:
BKR 1 OPERATING TIME
MESSAGE
φB:
BKR 1 OPERATING TIME
MESSAGE
φC:
BKR 1 OPERATING
MESSAGE
TIME:
menu for clearing breaker arcing current records. The
L90 Line Differential Relay
NEWEST SAMPLE TIME
!
BREAKER 1(4)
0 ms
0 ms
0 ms
0 ms
values are in units of kA
BKR 1 ARCING AMP
6 ACTUAL VALUES
6.4.4 DATA LOGGER
is the time the most recent sam-

6.4.5 BREAKER MAINTENANCE

2
-cycles. Refer to the
BREAKER OPERATING TIME
GE Multilin
is

Advertisement

Table of Contents
loading

Table of Contents