Fiber-Laser Transmitters - GE UR F35 Series Instruction Manual

3 HARDWARE
The following figure shows the configuration for the 72, 73, 7D, and 7K fiber-laser modules.
The following figure shows configuration for the 2I and 2J fiber-laser module.
Observing any fiber transmitter output can injure the eye.
When using a laser Interface, attenuators can be necessary to ensure that you do not exceed the
maximum optical input power to the receiver.
GE Multilin
Figure 3–30: 7X LASER FIBER MODULES
Figure 3–31: 2I AND 2J LASER FIBER MODULE
F35 Multiple Feeder Protection System
3.3 DIRECT INPUT/OUTPUT COMMUNICATIONS

3.3.3 FIBER-LASER TRANSMITTERS

3
3-27