Wattmetric Ground Fault; Transducer Inputs/Outputs - GE UR F35 Series Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES METERING
 WATTMETRIC
 GROUND FAULT 1
This menu displays the wattmetric zero-sequence directional element operating power values.

PATH: ACTUAL VALUES METERING
 DCMA INPUT xx

Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.

PATH: ACTUAL VALUES METERING
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
GE Multilin


WATTMETRIC GROUND FAULT 1(4)

WATT GND FLT 1:
0.000 W

TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA

TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
F35 Multiple Feeder Protection System
6.3.6 WATTMETRIC GROUND FAULT

6.3.7 TRANSDUCER INPUTS/OUTPUTS


DCMA INPUT xx

RTD INPUT xx
6.3 METERING
6
6-25