Siemens Simantic ET200SP System Manual page 280

Technical specifications
14.5 Mechanical and climatic environmental conditions
Mechanical environmental conditions
The following table shows the mechanical environmental conditions in the form of sinusoidal
vibrations.
Table 14- 9 Mechanical environmental conditions
Frequency band ET 200SP with
BusAdapters BA 2×FC,
BA 2xSCRJ, BA
SCRJ/FC, BA 2xLC and
BA LC/FC
5 ≤ f ≤ 8.4 Hz 3.5 mm amplitude
8.4 ≤ f ≤ 150 Hz 1 g constant acceleration
10 ≤ f ≤ 60 Hz 0.35 mm amplitude
60 ≤ f ≤ 1000 Hz 5 g constant acceleration
Tests of mechanical environmental conditions
The following table provides important information with respect to the type and scope of the
tests of environmental mechanical conditions.
Table 14- 10 Tests of mechanical environmental conditions
Condition tested Test standard
Vibrations Vibration test accord-
2)
ing to IEC 60068-2-6
(sinusoidal)
Shock Shock, tested accord-
2)
ing to IEC 60068-2-27
Repetitive shock Shock, tested accord-
1) 2)
ing to IEC 60068-2-27
Not applicable in the case of the digital output module F-RQ 1x24VDC/24..230VAC/5A
1)
Not applicable for motor starters
2)
280
ET 200SP with
BusAdapters BA 2×RJ45,
BA SCRJ/RJ45 and BA
LC/RJ45
---
Comment
Type of vibration: Frequency sweeps with a rate of change of 1 oc-
tave/minute.
BA 2×RJ45, BA SCRJ/RJ45, BA LC/RJ45, IM 155-6 PN BA, digital output
module F-RQ 1x24VDC/24..230VAC/5A
5 Hz ≤ f ≤ 8.4 Hz, 3.5 mm constant amplitude
•
8.4 Hz ≤ f ≤ 150 Hz, 1 g constant acceleration
•
BA 2×FC, BA 2xSCRJ, BA SCRJ/FC, BA 2xLC, BA LC/FC
10 Hz ≤ f ≤ 60 Hz, 0.35 mm constant amplitude
•
60 Hz ≤ f ≤ 1000 Hz, 5 g constant acceleration
•
Duration of vibration: 10 frequency sweeps per axis at each of three verti-
cally aligned axes
Type of shock: Half-sine
Shock intensity: 150 m/s
2
Direction of shock: 3 shocks in each direction (+/-) at each of three verti-
cally aligned axes
Type of shock: Half-sine
Shock intensity: 25 g peak value, 6 ms duration
Direction of shock: 1000 shocks in each direction (+/-) at each of three
vertically aligned axes
ET 200SP with ET 200SP with digital
IM 155-6 PN BA output module F-RQ
1x24VDC/24..230VAC/5
A
--- ---
peak value, 11 ms duration
System Manual, 12/2016, A5E03576849-AG
Distributed I/O system