3Di/Lc Module - Siemens Simantic ET200SP System Manual

Wiring
5.14 Mounting/disassembly of motor starters
5.14.3

3DI/LC module

Introduction
The optional 3DI/LC module with three inputs and one further LC input can be connected to
the motor starter. The status of the inputs of the 3DI/LC module can be seen via the process
image input (PII) of the motor starter.
Note
The 3DI/LC module can be used for the motor starter and the fail-safe motor starter.
The input actions can be parameterized. For reasons of operational safety, the LC input is
permanently set to manual local mode. For example, by parameterizing the inputs DI1 - DI3
with motor CLOCKWISE or motor COUNTER-CLOCKWISE, you can control the motor in
manual local mode.
The figure below shows the 3DI/LC module.
130
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG