Wiring Rules - Siemens Simantic ET200SP System Manual

5.6

Wiring rules

Wiring rules for the CPU/interface module and BaseUnits for I/O modules
Wiring rules for ...
Connectable cross-sections for solid cables
Connectable cross- Without end sleeve
sections for flexible
cables
With end sleeve (with plas-
tic sleeve)
With TWIN end sleeve
Stripping length of the wires
End sleeves in accordance with DIN 46228 with
plastic sleeve
***
* AWG: American Wire Gauge
** End sleeves without plastic sleeve: 0.25 to 2.5 mm
*** See note on end sleeves
Note
End sleeves
Optimum results with respect to a high-quality and permanent electrical connection with
maximum conductor pull forces at the same time can be achieved by using crimping dies,
preferably with smooth surfaces, which are provided, for example, with rectangular and
trapezoidal crimp cross-sections.
Due to the large number of crimping dies used in the industry, we can recommend others on
request. Crimping dies with a pronounced wave profile are unsuitable.
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
CPU/interface module (supply
0.2 to 2.5 mm
AWG : 24 to 13
*
0.2 to 2.5 mm
AWG : 24 to 13
*
0.25 mm to 1.5 mm
***
AWG : 24 to 16
*
0.5 mm to 1 mm
***
AWG : 20 to 17
*
8 to 10 mm
8 and 10 mm long
/AWG: 24 to 13
2
voltage)
2
2
AWG*: 24 to 14
0.14 mm to 1.5 mm
2**
AWG
0.5 to 0.75 mm
2
AWG
Wiring
5.6 Wiring rules
BaseUnits
(push-in terminal)
2
: 26 to 16
*
(see below)
2
: 20 to 18
*
87