Siemens Simantic ET200SP System Manual page 224

Commissioning
10.9 Identification and maintenance data
Identification data
IM_SWRevision_Internal_
•
Change
IM_REVISION_COUNTER
IM_PROFILE_ID
IM_PROFILE_SPECIFIC_TYPE
IM_VERSION
IM_Version_Major
•
IM_Version_Minor
•
IM_SUPPORTED
Maintenance data 1: (data record index AFF1 hex)
IM_TAG_FUNCTION
IM_TAG_LOCATION
Maintenance data 2: (data record index AFF2 hex)
IM_DATE
Maintenance data 3: (data record index AFF3 hex)
IM_DESCRIPTOR
Reading I&M data records with data record 255 (distributed via PROFIBUS DP)
The modules support standardized access to identification data via DS 255 (index 65000 to
65003). For further information on the DS 255 data structure, refer to the specifications of the
Profile Guidelines Part 1: Identification & Maintenance Functions, Order No.: 3.502,
Version 2.1, May 2016
224
Access
(1 byte) 00 - FF
Read (2 bytes) 0000
H
Read (2 bytes) 0000
H
Read (2 bytes) 0005
H
0003
H
0001
H
Read 0101
H
(1 byte)
(1 byte)
Read (2 bytes) 000E
H
Read/write (32 -
bytes)
Read/write (22 -
bytes)
Read/write (16 YYYY-MM-DD HH:MM
bytes)
Read/write (54 -
bytes)
Default
H
Provides information about parameter
changes on the module
(not used)
Generic Device
Interface modules/BusAdapters
I/O modules and motor starters
CPU
Provides information on the version of
the identification data
(0101
Provides information about the available
identification data (I&M1 to I&M3)
Enter a module identifier here that is
unique plant-wide.
Enter the installation location of the mod-
ule here.
Enter the installation date of the module
here.
Enter a comment describing the module.
System Manual, 12/2016, A5E03576849-AG
Explanation
= Version 1.1)
H
Distributed I/O system