Siemens Simantic ET200SP System Manual page 27

Basic component
BusAdapter
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG
Function
The BusAdapters allow free selection of the
connection technology for PROFINET IO. The
following versions are available for
PROFINET CPU/interface modules:
For standard RJ45 connector (BA 2×RJ45)
•
①
For direct connection of the bus cable
•
②
(BA 2×FC)
For POF/PCF fiber-optic cable (BA
•
③
2xSCRJ)
As media converter for POF/PCF fiber-
•
optic cable ⇔ standard RJ45 plug (BA
④
SCRJ/RJ45)
As media converter for POF/PCF fiber-
•
optic cable ⇔ direct connection of the bus
⑤
cable (BA SCRJ/FC)
For glass fiber-optic cable (BA 2xLC)
•
As media converter for glass fiber-optic
•
cable ⇔ standard RJ45 plug (BA LC/RJ45)
⑦
As media converter for glass fiber-optic
•
cable ⇔ direct connection of the bus cable
⑧
(BA LC/FC)
For mixed ET 200SP/ET 200AL configuration,
you require the BusAdapter BA-Send 1xFC
①
(plugged into the BaseUnit BU-Send).
Connect the bus cable for ET-Connection to
the BusAdapter BA-Send 1xFC.
⑥
System overview
2.4 Components
Figure
27