Siemens Simantic ET200SP System Manual page 174

Configuration control (option handling)
Procedure
To set up the configuration control, follow these steps:
Step Procedure
1 Enable configuration control in STEP 7
2 Create control data record
3 Transfer control data record
Block library "OH_S71x00_Library"
The block library OH_S71x00_Library
(https://support.industry.siemens.com/cs/#document/29430270?lc=en-WW) is available for
download from the Internet. The block library contains data types with the structure of the
control data records for the ET 200SP distributed I/O system. You can implement your
flexible automation solution inexpensively with the help of these data types.
Note
Configuration control in the case of motor starters
"Manual local" mode is possible in the case of motor starters when configuration control is
active. The motor starter works with the last valid parameters. Do not change the
parameterization while "manual local" mode is active.
174
See...
Section Configuring (Page 175)
Section Creating the control data record
(Page 177)
Section Transferring the control data
record in the startup program of the CPU
(Page 187)
Distributed I/O system
System Manual, 12/2016, A5E03576849-AG