Table of Contents
Advertisement
Standard processing in SVP mode
6.5.6 Setting operating mode via PROGRAM LOAD FRAME: DETAIL-2
The operating mode can be reset using the PROGRAM LOAD FRAME: DETAIL-2. This
selects the appropriate firmware for running BS2000 or VM2000.
The following are specified in the example below:
VM2000 operating mode
executing IPL after reloading the firmware
Conditions
You must be in the PROGRAM LOAD FRAME: DETAIL-1 screen.
Invoke PROGRAM LOAD FRAME: DETAIL-2 screen
Press the
Ê
The PROGRAM LOAD FRAME: DETAIL-2 screen appears:
-VM MODE-
>*3 AVM/EX
LTG
Figure 43: PROGRAM LOAD FRAME: DETAIL-2 screen
VM MODE =>
EXA MODE =>
IPL EXECUTION =>
U25339-J-Z126-1-7600
key.
P9
----- PROGRAM LOAD FRAME: DETAIL-2 -----
-EXA MODE-
==> 3
==> 1
*1 NATIVE
>*1 ENABLE
*2 EMOS
*2 DISABLE
CL-0
-IPL EXECUTION-
==> 1
>*1 ENABLE
*2 DISABLE
*ENTER
*PF3
*PF9
CPU-0 CHP-0
RUN
Enter
for VM2000 operation.
3
Always enter
Enter
.
1
Setting operating mode
E02L01F
EXECUTE
GO TO BASIC FRAME
GO TO DETAIL-1
M
FLAG CODE = F6C0C100 00000F00
TAST
.
1
87
Advertisement
Table of Contents
