Dirt may adhere to the fixing units inside the machine and cause black streaks to appear on printouts. To clean the
fixing unit, perform the following procedure. Note that you cannot clean the fixing unit when the machine has
documents waiting to be printed. To clean the fixing unit, you need plain A4 or Letter size paper. Set the paper in the
paper drawer or multi-purpose tray (
Purpose Tray(P. 41) ) before performing the following procedure.
Cleaning consumes the toner cartridge. Make sure that there is sufficient toner cartridge remaining
Checking the Amount Remaining in the Toner Cartridge(P. 397)
to select <Adjustment/Maintenance>, and press
Select <Clean Fixing Assembly>, and press
Check that the size and type of paper displayed on the screen is loaded in the
machine, and press
The cleaning sheet is printed out.
Load the printed cleaning sheet in the multi-purpose tray, with the printed side face
Loading Paper in the Paper Drawer(P. 37)
Loading Paper in the Multi-