Canon LBP251dw User Manual page 177

Hide thumbs Also See for LBP251dw:
Table of Contents

Advertisement

*
When you select the [Device Type], select [Canon Network Printing Device with P9100] under [Standard].
5
Click [Finish].
6
Click [Close].
Changing the port type or number
If the printing protocol (LPD or RAW) has been changed on the machine side (
Protocols and WSD Functions(P. 165) ) or the port number has been changed (
Numbers(P. 226) ), the corresponding settings on the computer must also be configured. This operation is
not needed for WSD ports.
MFNP port
1
Click [Configure Port].
2
Under [Protocol Type], select [RAW] or [LPR], and change the [Port Number].
3
Click [OK].
Standard TCP/IP port
1
Click [Configure Port].
2
Under [Protocol], select [Raw] or [LPR].
If you selected [Raw], change the [Port Number].
If you selected [LPR], enter "lp" in [Queue Name].
Network
171
Configuring Printing
Changing Port

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lbp252dw

Table of Contents