Restart the machine.
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
Checking whether the settings are correct
Make sure that the Remote UI screen can be displayed with your computer by using the IPv6 address of the
Starting Remote UI(P. 270)
Selecting settings from the operation panel
IPv6 settings can also be accessed by pressing
If you changed the IP address after installing the printer driver
You need to add a new port.
Setting IPv4 Address(P. 154)
Viewing Network Settings(P. 161)
on the operation panel.
Configuring Printer Ports(P. 168)
IPv6 Settings(P. 294)