Be sure to remember the PIN that you have set. If you have forgotten the PIN, contact your local authorized
Canon dealer or the Canon help line.
Configuring settings via the Remote UI
Start the Remote UI and log on in System Manager Mode. Click [Settings/Registration]
By using the Remote UI, you can register a variety of information, including contact information,
Administrator comments, the installation location of the machine, as well as to the settings that you can
register by using the operation panel. The registered information can be viewed on the [Device Information]
page of the Remote UI.
Logging on to the machine
If you try to access <Network Settings> or <System Management Settings>
when only the System Manager ID is enabled, the following logon screen is
You must also enter the System Manager ID and PIN to log on using the
Remote UI in System Manager mode.
Setting Access Privileges(P. 206)
Setting the Department ID Management(P. 209)
[Edit] and specify the necessary settings on the displayed screen.
Checking System Manager Information(P. 278)
Starting Remote UI(P. 270)