3
Disassembly/Assembly > Fixing System > Removing the Fixing Unit > Procedure
Fixing System
Layout drawing
[1]
Key No.
Name
[1]
Fixing Unit
3
Disassembly/Assembly > Fixing System > Removing the Fixing Unit > Procedure
■ Preparation
1) Remove the Rear Cover Unit.(Refer to page 3-19)
2) Remove the Rear Right Cover.(Refer to page 3-19)
■ Procedure
CAUTION:
Be sure not to disassemble the Fixing Unit because it requires adjustment.
Points to Note when Assembling and Disassembling:
• If the Front Cover Unit is open, close it.
• Check that the Link [1] is housed within the main body.
F-3-130
Reference
(Refer to page 3-62)
T-3-28
Removing the Fixing Unit
3-62
[1]
F-3-131
3-62