Print density will be lighter when you select stronger improvement.
When printing from the computer, the setting in the printer driver takes precedence. When the
setting of [Graphics Mode] in the printer driver is changed to [UFR II Mode] and [Barcode Adjustment
Mode] is changed to [Printer Default], the setting in the operation panel takes precedence.
When you set this item to one of <Mode 1> to <Mode 3>, <Special Printing Mode A> is automatically
set to <Off>.
Specify the page layout settings such as binding position and margin values.
If you are binding the printouts with a binding tool such as a stapler, use this item to specify whether to bind on
the long or short edge. Specify the setting of this item in combination with <Gutter>, which specifies the binding
margin to apply to the binding position.
Edge> or <Short Edge>
Specify this to bind on the long edge of paper.
Setting Menu List
Select the mode
Special Printing Mode A(P. 334)