Enable Direct Connection
Set whether to connect directly. By enabling this function, connecting directly with the machine is possible even in an
environment without an access point or wireless LAN router.
Setting <Enable Direct Connection> to <On> prevents use of a wired LAN or any wireless LAN other than Direct
Specify settings for using the machine in a TCP/IP network, such as IP address settings.
Specify settings for using the machine in an IPv4 network.
IP Address Settings
Configure the IP address, which is used for identifying devices, such as computers and printers, on a TCP/IP
Setting IPv4 Address(P. 154)
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Gateway Address: 0.0.0.0
Setting Menu List
Restart the machine
<Enable Direct Connection>
Select <Off> or <On>