When changing the paper size or type
The factory default settings for paper size and type are <A4> and <Plain>, respectively. If you load a
different size or type of paper into the machine, make sure to change the settings. If you do not change
the settings, the machine cannot print properly.
Printing on the Back Side of Printed Paper (Manual 2-Sided Printing)
You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into the
multi-purpose tray (
(previously printed side face down).
Load one sheet of paper each time you print.
You can use only the paper printed with this machine.
You cannot print on the side that has previously been printed on.
Notify to Check Paper Settings(P. 343)
Specifying Paper Size and Type in the Paper Drawer(P. 51)
Loading Paper in the Multi-Purpose Tray(P. 41) ), with the side to print face up