Settings marked with an asterisk (
Select Wired/Wireless LAN(P. 290)
Wireless LAN Settings(P. 290)
Enable Direct Connection(P. 292)
TCP/IP Settings(P. 292)
SNMP Settings(P. 298)
Dedicated Port Settings(P. 298)
Waiting Time for Connection at Startup(P. 299)
Ethernet Driver Settings(P. 299)
IEEE 802.1X Settings(P. 299)
Device Settings Management On/Off(P. 300)
Initialize Network Settings(P. 300)
Select Wired/Wireless LAN
When switching the machine from Wireless LAN to Wired LAN, you need to specify the setting. Conversely, when
switching the machine from Wired LAN to Wireless LAN, you do not need to specify this setting (You can switch using
the following <Wireless LAN Settings>).
Wireless LAN Settings
Specify settings for connecting the machine to a wireless LAN. You can also view the current settings or specify the
setting for saving power consumption.
WPS Push Button Mode
Select to automatically configure a wireless connection by using the button on a WPS wireless router.
Up Connection Using WPS Push Button Mode(P. 138)
WPS PIN Code Mode
Select to configure a wireless connection by entering a PIN code for a WPS wireless router.
Connection Using WPS PIN Code Mode(P. 140)
Setting Menu List
All the settings about the network are listed with short descriptions. Default settings
are marked with a dagger ( ).
) cannot be imported or exported.
Selecting Wired LAN or Wireless LAN(P. 134)