Select the [Use Remote UI Access PIN] check box and specify the PIN.
[Use Remote UI Access PIN]
If you select this check box, you must enter a PIN to access the Remote UI.
To set a PIN, select the check box and enter a number of up to seven digits both in the [PIN] and [Confirm]
Using the operation panel
You can also set a Remote UI Access PIN by pressing
If Remote UI settings are initialized
The Remote UI Access PIN is also initialized. After an initialization, reset the PIN.
Setting Access Privileges(P. 206)
Setting the System Manager ID(P. 207)
on the operation panel.
Initializing Menu(P. 423)