Additional Server Led Information - Avaya S8700-Series Installing And Configuring

Chapter 8: Installation verification
Figure 11: LEDs on the back panel of the S8710 and the S8720 Servers
1
2
3
4
msds871c KLC 093004
Figure notes:
1. Not used
2. Not used
3. For hardware duplication mode on
the S8710, DAL2 fault (amber)
4. For hardware duplication mode on
the S8710, DAL2 power (green)

Additional server LED information

For more information on server LEDs, see
Maintenance Procedures for Avaya Aura
Servers, 03-300432.
- (When S8400 is deployed as an ESS). The S8400 ESS raises a major alarm when it
becomes active. The raising of this alarm also lights the red alarm LED on the
faceplate of the S8400 circuit pack.
88 Installing and Configuring the Avaya S8500-Series Server
3
2
3
2
VDCI
3
100 MGz
2
100 MGz
iLO
2 1
1
133 MGz
5 6 7
5. RJ45 link (green
6. RJ45 link (green)
7. Indicates active when on steady or standby mode
when blinking (blue)
This LED duplicates the Active/Standby LED on the
front panel.
8. Power supply (green)
™
Communication Manager, Media Gateways and
UID
8