Configuring memory for an S8720 Server
For an S8720 Server, you must select the memory configuration to be used: either Standard or
Extra Large. If Hardware Duplication is turned on, administration for the S8720 in an XL
configuration is allowed only if the servers are equipped with DAL2 duplication memory cards.
Note:
If the customer chooses to increase the number of VAL circuit packs or the
Note:
number of Logged-In Agents, the customer will need to get a new License File
with increased capacities.
Note:
If the main servers are S8720 configured as Extra Large (XL), ESSs and LSPs
Note:
must be configured as XL. See
1. Before configuring the memory, stop Communication Manager by running the bash
command stop -acf.
2. On the System Management Interface, click Installation > Configure Server.
3. Click Continue until you get to the Specify how you want to use this wizard page.
4. Select Configure individual services and click Continue.
5. On the main menu under Configure Individual IP Services, click
Configure Memory (if a main server)
l
Configuring memory for an S8720 Server
Ensuring ESS and LSP compatibility
on page 50.
Issue 8 May 2009
49