Setting Locations (If Necessary) - Avaya S8700-Series Installing And Configuring

Setting locations (if necessary)

After you set the rules for daylight savings time, you must set the locations for all port networks.
Port networks can be in different time zones. Use SAT commands to set the locations for the
port networks.
1. Type change locations and press Enter.
change locations
Number
1
2
3
4
5
6
7
8
9
10
11
2. In the ARS Prefix 1 Required for 10-Digit NANP Calls? field, type y.
The system displays the location information.
3. Click Submit to save the changes.
Note:
The location of a port network is defined on the Cabinet SAT screen (change
Note:
cabinet X). The location of a network region is defined on the
ip-network-region SAT screen (change ip-network-region X).The
location of an H.248 media gateway is defined on the change media-gateway
SAT screen (change media-gateway X). The Location field in the
ip-network-region SAT screen is part of the association to the
daylight-savings-rule by which a IP phone behaves.
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Name Timezone
Offset
Main + 00:00
CA - 02:00
LOCATIONS
Daylight-Savings
Rule
0
0
:
:
:
:
:
:
:
:
:
Setting locations (if necessary)
Page 1 of
Number Plan
Area Code
Issue 8 May 2009
5
75