Additional Media Server Led Information - Avaya S8700 Series Installing And Configuring

Note:
The Active/Standby LED, which is labeled as 5 in
Note:
When pushed, this button has no effect other than to turn off the LED
momentarily. The LED returns to the normal state within a few seconds after the
button is pushed.
Figure 6: LEDs on the back panel of the S8710 and the S8720 Media Servers
1
2
3
4
msds871c KLC 093004
Figure notes:
1. Not used
2. Not used
3. For hardware duplication mode on
the S8710, DAL1 fault (amber)
4. For hardware duplication mode on
the S8710, DAL1 power (green)

Additional media server LED information

For more information on media server LEDs, see Maintenance Procedures for Avaya
Communication Manager, Media Gateways and Servers, 03-300432.
Installing and Configuring the Avaya S8700-Series Media Server
3
2
3
2
VDCI
Additional media server LED information
3
100 MGz
2
100 MGz
iLO
2 1
1
133 MGz
5 6 7
5. RJ45 link (green
6. RJ45 link (green)
7. Indicates active when on steady or standby mode
when blinking (blue)
This LED duplicates the Active/Standby LED on the
front panel.
8. Power supply (green)
Figure 5, is on a push button.
UID
8
February 2007
69