Chapter 5: IP interface translations
To administer IPSI circuit packs, use a terminal emulation program to issue Communication
Manager SAT commands.
For Communication Manager terminal emulation, use a program such as Avaya Native
Configuration Manager, Avaya Terminal Emulation, or HyperTerminal.
You also can use Avaya Site Administration to issue SAT commands. To administer some of the
features in the latest release of Communication Manager, you must use the latest version of
Avaya Site Administration.
Perform these tasks to administer IPSI circuit packs:
Inputting initial system translations
l
Adding media gateways
l
Inputting initial system translations
1. Open a SAT session. See
2. Enter translations:
If the system translations were prepared offsite, enter the translations and reset the server.
If the translations are not available, enter minimal translations to verify connectivity to the
port networks.
3. After you enter the translations, type save translation and press Enter to save the
translations to the hard disk drive.
on page 57
on page 58
on page 60
on page 61
on page 62
on page 62
on page 63
Accessing the SAT
on page 61
on page 62
on page 103.
57