Additional Media Server Led Information - Avaya S8500 Installing And Configuring

Chapter 9: Installation verification
Figure 15: Rear view of S8500B Media Server
Figure notes:
1. Speed 1 Gbps LED on Eth 0.
4. Speed 1 Gbps LED on Eth 1.
2. Transmit/receive activity LED on Eth 0.
3. Transmit/receive activity LED on Eth 1.
Note:
On the S8500C, the Ethernet ports are located below the dual NIC but the port
Note:
LEDs have the same location and function as shown in
Figure 2: S8500C back panel

Additional media server LED information

For more information on media server LEDs, see Maintenance Procedures for Avaya
Communication Manager, Media Gateways and Servers, 03-300432.
80
Installing and Configuring the Avaya S8500 Media Server
2
1
2
4 3
When lit, these LEDs indicate that the Ethernet network
speed is 1 Gbps. When off, these LEDs indicate that the
Ethernet network speed is 10 Mbps or 100 Mbps.
When lit, these LEDs indicate activity between the media
server and the network.
on page 11.
h2ms85b KLC 101904
Figure 15. See
February 2007