Verifying The Date And The Time (Main Server Only) - Avaya S8700-Series Installing And Configuring

Chapter 7: Postinstallation administration

Verifying the date and the time (main server only)

Use SAT commands to verify the date and time.
1.Type display time and press Enter.
display time
WARNING: Changing the date or time may impact BCMS, CDR, SCHEDULED
2. Verify that the date and the time of day are correct.
If the date and the time of day are correct, go to 5.
If the date and time of day are not correct, proceed to step 3.
3. Verify connectivity to any administered Network Time Server:
a. On the System Management Interface, from the Administration menu,
click Server (Maintenance).
b. On the left navigation panel, click Network Time Sync. The Network Time Sync
screen confirms synchronization to any administered Network Time Server.
c. Resolve any connection or administration issues related to the Network Time Server. If
the Network Time Server is not administered:
1. On the left navigation menu, click Server Date/Time.
2. Set the correct date and the correct time. Verify that the time zone is correct.
!
Important:
If you change the time zone, you must reboot the server. For more information,
Important:
Rebooting the server
4. Repeat this procedure, beginning with step 1.
5. Verify that the Daylight Savings Rule field is correct.
0 if this server is in a location that does not use daylight savings time
l
76 Installing and Configuring the Avaya S8500-Series Server
DATE
Day of the Week: Friday
Day of the Month: 9
TIME
Hour: 14 Minute: 19
Daylight Savings Rule: 0
on page 42.
DATE AND TIME
Month: June
Year: 2006
Second: 36 Type: Standard
Page 1 of 1