Equipment Specifications - Avaya S8700-Series Installing And Configuring

Chapter 1: Introduction
Verify that the rail kit to support the server is available to install (S8400 installed in a G650
l
carrier only).
Verify that the rail kit to support the server is available to install.
l
Verify that the rail kit that is required to support the UPS is installed on the rack or available
l
to install. For how to install the rails, see the documentation that comes with the rail kit.
Verify that the equipment racks are grounded per local code. See Job Aid: Approved
l
Grounds (555-245-772).
Verify that the customer-provided AC power to the rack is from a nonswitched outlet.
l
Verify that cables for theTN2312BP (IPSI) circuit packs are labeled and run from the
l
control hardware rack to the port networks or that appropriate connectivity is provided.

Equipment specifications

!
Important:
The TN8400BP cicuit pack is compatible with Communication Manager Release
Important:
4.0.3 and later.
The components of the S8700-series Server control network consist of two servers, one or two
Ethernet switches, and two UPSs. The physical specifications for the control network
components are shown in
Table 1: Control network components specifications
Component
Server
S8710, S8720,
or S8730
Ethernet switch:
C363T
C364T
UPS:
1000 VA
1500 VA
14 Installing and Configuring the Avaya S8500-Series Server
Table 1.
Dimensions
English
(height x width x depth
)
in inches
3.4 x 17.5 x 26
1.75 x 17 x 14.4
1.75 x 17 x 14.4
3.4 x 17.2 x 17.7
3.5 x 17 x 24
Dimensions
Metric
(height x width x depth
)
in centimeters
8.6 x 45 x 66
4 x 43 x 37
4 x 43 x 37
9 x 43 x 45
9 x 43 x 61
Height Weight
(u) (lb/kg)
2 60/27
(loaded)
1 11/5
1 11/5
2 49.4/22.4
2 50/23