Avaya S8700-Series Installing And Configuring page 21

Figure 3: Duplication and control network cabling for software duplication (S8730)
2
3
Figure notes:
1. Eth0 — Server Duplication Link - duplication crossover cable
2. Eth2 — To an Ethernet switch and/or the corporate LAN for control network A (CNA)
3. Eth3 — To an Ethernet switch and/or the corporate LAN for control network B (CNB)
4. Eth4 — To the corporate LAN if the control networks are dedicated.
Note:
These are typical Ethernet port assignments. The customer might specify
Note:
different assignments for Eth2, Eth3, and Eth4.
5
4
2
3
1
PCIe 2 PCIe 1
1
5
4
2
3
1
PCIe 2 PCIe 1
About server port connections
4
UID
ILO 2
ILO 2 UID
hw8730s2 LAO 081607
Issue 8 May 2009
2
1
21