Avaya S8700-Series Installing And Configuring page 67

Note:
Ensure that you have the password before proceeding.
Note:
Depending on the operating system on the Services laptop computer, you might need to clear
the Address Resolution Protocol (ARP) cache before entering a new IP address. If you enter an
IP address and your computer cannot connect, try clearing the cache.
1. On your laptop computer, click Start > Run to open the Run dialog box.
2. Type command and click OK to open a MS-DOS Command Line window.
3. Clear the Address Resolution Protocol (ARP) cache in the laptop.
4. To log into the IPSI, use SSH and the IP address 192.11.13.6.
For information on how to use SSH, see
server with SSH
Note:
While connected to the IPSI, type help or ? to obtain online help. Most
Note:
commands have two or three letter abbreviations.
5. Type ipsilogin and press Enter.
Note:
The craft login used on the IPSI has a different password from the craft login used
Note:
on the servers.
6. Log in as craft.
Prompt = [IPADMIN]:
7. Type show control interface and press Enter and then type show port 1 and
press Enter to see the current control interface settings.
on page 95.
Accessing the command line interface of the
IPSI address configuration
Issue 8 May 2009 67